Side Speakers - Philips 8601 Series User Manual

During the satellite installation, select Two Tuners.
Unicable or MDU
If you use a Unicable system, connect the cable to
the SAT 1 connection. Use a coaxial cable fit for
connecting a satellite antenna dish and only use
Unicable complaint cable splitters. Make sure your
satellite dish is perfectly aligned before you start the
installation.
During the satellite installation, select Two
Tuners and later Unicable.
2.7

Side Speakers

Connect the Side Speakers
Your TV comes with 2 detachable side speakers.
These 2 speakers are separately packed in the TV
box.
Mount and connect the supplied side speakers to
your TV. The TV sound is incomplete without these
speakers.
To mount the side speakers ...
1 - Hold the slim speaker with the short connector
cable at the bottom and bring it close to the side of
the TV screen. The built in magnets in the speaker
will pull the speaker against the screen and hold it in
place. You can slide the speaker up or down slightly
to level the top with the TV screen. The speaker grill
should be directing to the front.
2 - Connect the short cable to the connector marked
as  , on each bottom corner of the TV screen.
3 - Mount the other speaker in the same way.
To disconnect, simply unplug the connectors.
Speaker Stands PTA860
With the Philips PTA860 Wireless Detachable
Speaker Stands* you can position your side speakers
further away from your TV screen. The sound will be
more spacious and will better fit the large screen
viewing experience.
* The PTA860 is sold separately.
7