Ambilight Settings - Philips 8601 Series User Manual

2 - Select Sound and press  (right) to enter the
menu.
3 - Select Advanced > Audio Out Levelling.
4 - If the volume difference is large, select More. If
the volume difference is small, select Less.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Audio Out Levelling affects both the Audio Out -
Optical and HDMI ARC sound signals.
Audio Out Delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio Out Delay on the TV.
To switch off Audio Out Delay...
1 - Press , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Advanced > Audio Out Delay.
4 - Select Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Audio Out Offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio
Out Offset.
To synchronise the sound on the TV...
1 - Press , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Advanced > Audio Out Offset.
4 - Use the slider bar to set the sound offset.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Speakers
Select your Speakers
In this menu you can switch the TV speakers on or off.
If you connect a Home Theatre System or a wireless
Bluetooth speaker, you can select which device is
playing the TV sound. All available loudspeaker
systems are shown in this list.
If you use an HDMI CEC connection for an audio
device (like a Home Theatre System), you can select
EasyLink Autostart. The TV will switch on the audio
device, send the TV sound to the device and switch
off the TV speakers.
To set the TV speakers...
1 - Press , select All Settings and press OK.
2 - Select Sound and press  (right) to enter the
menu.
3 - Select Advanced and press  (right) to enter
the menu.
4 - Select Speakers and press  (right) to enter
the menu.
5 - Select On, Off, or EasyLink Autostart .
6 - Press  (left) repeatedly if necessary, to close
the menu.
12.4

Ambilight Settings

Ambilight Style
For more information, in Help, select Keywords and
look up Ambilight Style.
Ambilight Settings
Ambilight Brightness
With Ambilight Brightness, you can set the level of
brightness of the Ambilight.
To adjust the level...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Brightness.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Brightness Bottom Side
You can set the level of brightness of the Ambilight at
the bottom of the TV. A white table surface might
reflect the Ambilight too much.
To adjust the level...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Brightness Bottom Side.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
57