Table of Contents
Advertisement
APEX
3 SERIES MIG PENDANT MANUAL
®
Weld Screen
During the weld, the screen will show voltage and
amperage feedback on the Weld Screen – see FIGURE
11 - Weld Screen Options. Pressing the menu buttons
will move the user through the Menu Option Variables
similar to FIGURE 13- All Test Screens.
The Setup Selection is replaced with the Adv Selec-
tion. Autoheight can also be engaged or disengaged.
See FIGURE 10 - Weld Screen Options.
Weld Screen Buttons
The Weld Screen buttons work similar to the Idle
screen buttons – see Idle Screen section on page
B-7.
Pressing the Start/Stop button during the weld halts
the weld and moves into the Jog Menu. See FIGURE
16 on page B-11.
FIGURE 11 - Weld Screen Options
Test Screen
Similar to the Weld Screen, the Test Screen will show
voltage and amperage feedback but the feedback
values will be zero – FIGURE 12 - Test Screen
Options. Pressing the menu buttons will move the user
through the Menu Option Variables as shown in the
Idle Screen section.
FIGURE 12 - Test Screen Options
Test Screen Buttons
The Test Screen buttons work similar to the Weld
screen buttons – see FIGURE 13 - All Test Screens.
FIGURE 13 - All Test Screens
B-9
OPERATION
Advertisement
Table of Contents
