Troubleshooting - Asus GX1026 Quick Start Manual

Troubleshooting

This section provides solutions to some common problems which you may
encounter when installing or using the ASUS GX1026 switch. Contact the
ASUS technical support if the problem still exists after you have performed the
troubleshooting solutions.
Problem
The POWER LED does not light up.
The STATUS/SPEED LED
does not light up even after a network
device is connected to the port.
Check if the power cable is properly
connected to the switch and to a power
outlet with a correct voltage output.
Check if the Ethernet cable is properly
connected to the switch and to the network
device.
Ensure that the switch and your network
device are powered on.
Check if the Ethernet cable meets your
network requirements. To connect a gigabit
switch port, you need a Category 5 cable to
get gigabit transfer speed.
Quick Start Guide
Solution
7