Using Reporting - Belkin Network Router User Manual

If you opt to subscribe to Parental Control's Reporting feature (an extra fee is
required), you will be able to access reports in two ways.
Note: The Reporting screen is a tab on the Change Policy screen discussed
previously.
1. Every time access to a blocked website is attempted, a Policy Violation screen
appears. These screens offer a link to the Policy Administration page, and
require the Parental Control password to be typed in for access.
2. There is a link in the Router's Parental Control page to the Reporting page,
and access to the Reporting page requires the Parental Control password.
After logging into the Reporting site, the Parental Control Manager can click the
Reporting tab to review web-surfing history, both for blocked and allowed sites.
Note: If a single computer overrides Parental Control for one hour, or if Parental
Control is turned OFF on the Router, web access during these periods will not
result in history information in Reporting.
Advanced
Clicking the Advanced tab will allow the user to modify the default timeout
settings. When using Parental Control, the Router checks each web request
against the user's Internet policy. Generally, this rating takes less than one
second to obtain. However, if the rating site is temporarily down, or if a
previously un-rated website takes longer than usual to load and be dynamically
rated, the Router will timeout after 10 seconds. Default settings dictate to
block all sites on timeouts, however, the user can choose to allow all sites
after timeouts.
Refresh
This feature is only used if the Parental Control settings on the Router (e.g.,
expiration date) become corrupted. Pressing this button causes the Router to
request an updated setting from Belkin.

USING REPORTING

11