Updating A Previously Installed App - Glensound PARADISO Product Details

Updating A Previously Installed App

If you have an earlier version of Glensound Controller installed on your PC, then you
should not need to perform a complete new installation to update it.
Downloading
The GlenController update file may be downloaded. It is a zipped file. At the time of
supplying this manual the file location is:
http://www.glensound.co.uk/Software/Dante/GlenController_Upgrade_v2.9.1.zip
Please check the 'App Latest Version' tab on the Paradiso's web page
http://www.glensound.co.uk/product-details/paradiso/ to find details of the latest
version
The above file is for 64 bit Windows, If you have a 32 bit version of Windows 10 then
please contact techinfo@glensound.co.uk
Please note these address is the location of the file and not web pages, if you put the
above address in your browser it should automatically download the file.You may
see 'page not found' but all that you actually need is for the the file to be
downloaded.
Make sure the GlenController download files are in a folder on your local machine
and unzip the files to a know location.
Stage 1 – Install The App
1) Locate and double click the file 'GlenController_x.x.x.x_x??.appx from the
downloaded files.
(Whereby the x.x.x.x will be the version number and the x?? will be either 64
or 86 depending upon whether you are installing the 64(64) or 32(86) bit
version of the App.
Page 17 of 62