Wacom DTH-2400 Installation Manual & Hardware Manual page 21

DISPLAY
Display Panel
Screen Size
Aspect ratio
Number of pixels
Input Video Connector
Input Video Signal
Output Video Connector
Output Video Signal
Supported Resolution
White Luminace Uniformity
Pixel Pitch
Viewing Angles @ CR>0 (horizontal/ver-
tical)
Display Colors
Contrast Ratio
Luminance
Response Time (Tr + Tf)
OSD Manual Control
Plug and Play
LCD quality
1
DTH-2400.indd 18
a-Si Active Matrix TFT LCD (h-IPS)
24. inch (8.4 x 24.0 mm)
6:0
20 x 200
DisplayPort, DVI-I (2 pin)
DisplayPort Complies with Standard V.a, applicable to HDCP
DVI .0 compliance
Analog RGB
no video output
20 x 200, 600 x 200, 280 x 024, 024 x 68, 800 x 600, 640 x 480 pixels
 % (min.)
0.20 (H) x 0.20 (V) mm
8 (8/8) / 8 (8/8) (typ.)
,0,4,824 colors (Depends on display card used.)
00: (typ.) (TBC)
2
220 cd/m (typ.) (TBC)
 ms (typ.)
According to NEC-DS "PA24"
DDC 2B, DDC/CI
Each LCD panel is produced under very stringent quality standards. Production techniques cannot guar-
antee an absolutely perfect TFT display. Wacom does not allow any pixel to be always white or always
black. A small number of pixels are allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.
2011/03/25 13:27:22