Advertisement

Quick Links

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to
place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®
will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid
only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned. For part(s)
after 90 days, please remit your request, postage prepaid to:
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise
applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations
may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the
repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages
may vary from state to state, so the above limitations may not apply in all cases.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
© Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W50072 and is the answer not in the manual?

Questions and answers

Summary of Contents for Performance Tool W50072

  • Page 1 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®...
  • Page 2 4.3 IN. LCD INSPECTION CAMERA Item Number W50072 OWNER’S MANUAL Simulated screen image. WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product.
  • Page 3: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
  • Page 4: Electrical Safety

    IMPORTANT SAFETY INFORMATION • If condensation occurs in the camera lens, allow it evaporate before using the unit again. • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
  • Page 5: Parts Listing

    PARTS LISTING Product includes: • Display Unit with • Nylon storage pouch - 4.3 in. color LCD monitor • Mirror, Hook and Magnet - 35 in. (90mm) Probe with Accessory Collar - IP67 Submersible 11/32 in. • Neck strap (9mm) diameter Camera •...
  • Page 6: Battery Meter

    LCD DISPLAY Light Output Battery Meter Level Digital Zoom Indicator Angle Indicator Simulated screen image. SPECIFICATIONS Specifications are subject to change without notice. Screen ..................4.3 in. color LCD monitor Camera Resolution ................... 640 x 480 VGA Screen Resolution ..................480 x 272 VGA Image Rotation ....................
  • Page 7: Operation

    OPERATION This palm scope inspection camera unit comes fully assembled. Before first use, carefully peel off and discard the plastic label over the LCD. 1. To begin use, carefully uncoil the camera probe assembly coiled around the battery compartment. 2. Once probe is fully extended, align the cable with the opening on the upper right of the backside of the unit.
  • Page 8: Battery Installation/Replacement

    BATTERY INSTALLATION/REPLACEMENT 1. Turn unit over to expose back. Press in the plastic tab on the right middle of the back cover and lift up to open. 2. Use a #0 Philips screwdriver to remove the screw in bottom middle of the battery cover. 3.

Table of Contents