Micro-Node International NANO-SPOT User Manual page 7

Step 4: This section will only appear if you enabled DMR mode.
Select the DMR master for your location from the drop down box. Select the DMR
color code you want your Nano-Spot to respond to. Generally it is recommended to
use color code 1. Then click the "Apply Changes" button at the bottom of this
section
Step 5: This section will only appear if you enabled DStar mode.
Select repeater 1 call sign type A,B,C or D from the drop down box, Enter the remote
password, Select the default DStar reflector, Select the APRS Host, Select the
ircDDBGateway language and whether you want time announcements. Then click
the "Apply Changes" button at the bottom of this section
Step 6: This section will only appear if you enabled YSF mode.
Select the YSF Startup Host from the drop down box, Select the APRS Host. Then
click the "Apply Changes" button at the bottom of this section.
Step 7: This section will only appear if you enabled P25 mode.
Select P25 Start up Host from the drop down box and set the default P25 NAC
(network access code). Then click the "Apply Changes" button at the bottom of this
section.
7 Nano - Spot User Manual Micro-Node International