Micro-Node International NANO-SPOT User Manual page 5

Step 7: Make the file system read and writable.
Type rpi-rw then press enter.
Step 8: Using the nano editor edit the WiFi configuration file to add your wireless router SSID
and security password.
Type sudo nano /etc/wpa_supplicant/wpa_supplicant.conf then press enter.
Step 9: Save your changes and exit the editor.
<ctrl> o
Type
<ctrl> x
Type
Step 10: Reboot the Nano-Spot
Type sudo reboot then press enter.
After the reboot process has completed your Nano-Spot should be connected to the wireless
router you have configured above. At this point you will use your computer web browser to
complete the configuration process.
5 Nano - Spot User Manual
then press enter to save your changes
then press enter to exit the editor
Micro-Node International