Accessories - Gilson SS-20 Operating Manual

9.6 Accessories

Description
Clean-N-Stor accessories are handy, time-saving devices for emptying, cleaning and
weighing functions associated with sieving operations. Inverting an 8in or 200mm sieve on
the stainless steel funnel allows quick emptying and cleaning of contents into a receiving
scoop or pan. A sieve stack can also be stored on top of the funnel. A scoop and soft-bristle
cleaning brush are included with all models. The SSA-801 attaches to the top of the SS-8R
case. SSA-802 is a stand-alone model that can be positioned directly over an electronic
balance, so sieve fractions can be weighed as the sieve is being cleaned. OBA-15R is an
adjustable-height Clean-N-Stor version designed to fit over taller balances.
Sieve Storage Racks
The SSA-820 Stainless Steel Wall-Mount Sieve Rack is designed for wall-mounted storage
of 8in (203mm) diameter sieves. Sieves are held on edge in eleven individual 3in (76mm)
wide
compartments, each holding one full-height or two half-height sieves. Compartment
bottoms are neoprene lined and inclined to keep sieves in place. Holes are provided for
mounting on 16in (406mm) centers and for bolting racks together vertically and/or hori-
zontally. The unit features rubber feet for optional desk or counter top use. The bottom
front flange has a 1-1/4in (32mm) high area to label slots for sieve sizes. Overall Assembled
Dimensions: 34-1/4x9x11in (870x229x279mm), WxDxH. Est. Ship Wt.: 26lb (12kg). The SSA-
822 Adjustable Wall-Mount Sieve Rack for 12in (305mm) diameter sieves is similar in de-
sign to SSA-820, but has slots every 1/2in (13mm) for variable placement of the eight sup-
plied dividers. Capacity is eight full-height or fourteen half-height sieves. Additional dividers
are available in sets of five as SSA-823. Overall Assembled Dimensions: 36-1/4x13x15-3/4in
(921x330x400mm), WxDxH. Sieve Rack Units are shipped with instructions for simple user
assembly. Est. Ship Wt.: 40lb (18kg). The SSA-803 Adjustable Bench Sieve Rack holds
all diameters of sieves up to 12in (305mm). This rack eliminates clutter and inconvenience
of nested storage and facilitates easy retrieval of sieves for speed and efficiency in the
lab. Stainless steel rack has non-skid rubber feet, and is supplied with two permanent and
two adjustable rubber coated sieve support rods. Unit accommodates twenty full-height
(forty half-height) 8in sieves, twelve full-height (twenty four half-height) 12in sieves, or forty
full-height 3in sieves. Sizes may also be mixed, and be as small as 3in diameter. Optional
SSA-804 Support Rod Set contains two rubber-covered rods, and may be used to increase
the capacity for 3in full height sieves to eighty. Dimensions: 26x13x13in (660x330x330mm),
WxDxH.
Wire Loop Sieve Cleaning Brush
metal bristles and a wire loop handle. 4-3/4" long brush designed for coarse wire cloth.
Fine Sieve Cleaning Brush
steel ferrule, lacquered wood handle, 1-1/4in diameter and 5-3/4in long.
Coarse Sieve Cleaning Brush
slanted brass wire bristles—perfect for No.30 and coarser wire cloth in round sieves.
SSA-820 Shown with Sieves
21 Washington Ave
18
Scarborough, ME 04074
ACCESSORIES
Clean-N-Stor Attachment for SS-8R Stand-Alone
is a 1-1/4" wide fan type brush. Features 1-5/8" long
is ideal for cleaning No.16 and finer sieves. Soft bristle, nickeled
has an 8-1/2in curved plastic handle with 1-1/2in x 1-3/4in of
Clean-N-Stor Adjustable-Height
Clean-N-Stor
Wall-Mount Sieve Rack
Adjustable Wall-Mount Sieve Rack
Adjustable Bench Sieve Rack
SSA-803 Shown with 8" Full Ht. Sieves
Model
SSA-801
SSA-802 Shown with Sieve
SSA-802
OBA-15R
TSA-173
SSA-820
SSA-822
SSA-803
TSA-173
TSA-170
TSA-172
888.293.2121
sales@myerstest.com
myerstest.com
TSA-171
TSA-172
18