Adjusting Settings - Delfin ElastiMeter User Manual

Measurement history
When the ElastiMeter is at the READY stage, the measurement history can be
shown by pressing the operate button briefly. Five previous ISE readings are
shown as numbers first and then as a graph. The view from numerical to
graphical changes automatically in 10 seconds, but can also be changed by
pressing the operating button briefly. After the graph view the message READY
is shown on the display again. The instrument is ready to measure also during
the history display.
A
DJUSTING SETTINGS
1. Turn the ElastiMeter on by pressing the operating button briefly.
2. When the device is on, press the button again and hold it until the MENU
is displayed. Then release.
3. The indicator ">" starts to scroll downwards through the menu.
4. Press the operating button once again when the indicator ">" is in front
of the desired row to select from the menu.
Power Off
The ElastiMeter is switched off.
PC Mode OFF/ON
Turns the PC connection OFF or ON. The wireless connection to the computer
can be used only when the wireless receiver unit is connected to the PC, the
DMC software is running and the PC mode of the ElastiMeter is ON.
Group Mode
The ElastiMeter is paired with the wireless receiver unit, which comes together
with the instrument. Select Group Mode, if other than the original receiver unit
ElastiMeter User Manual version 1.6
7
15.8.2018