Related Manuals for LigoWave LigoPTP 5-23 MIMO PRO
Summary of Contents for LigoWave LigoPTP 5-23 MIMO PRO
-
Page 1: Quick Installation Guide
LigoPTP 5-23 MIMO PRO Quick Installation Guide Revision 1.0 March 5, 2012 Copyright © 2012 LigoWave www.ligowave.com... - Page 2 This user’s guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of LigoWave. Notice LigoW ave reserves the right to change specifications without prior notice.
-
Page 3: Fcc Warning
énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. LigoWave Page 2... - Page 4 Antenna Compliance The LigoPTP 5-23 MIMO PRO contains internal antenna. CE Mark Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
-
Page 5: About This Guide
Purpose The purpose of this guide is to provide a quick and easy explanation of getting started with the LigoPTP 5-23 MIMO PRO. This is only a starter guide and full documentation may be found at our online wiki: http://www.ligowave.com/wiki... -
Page 6: Hardware Introduction
Hardware Introduction General Overview The label of the LigoPTP 5-23 MIMO PRO contains: Model name. The official model name is LigoPTP 5-23 MIMO PRO FCC ID. The FCC ID is V2V-PTP523MP IC ID. 7607A-PTP523MP LigoWave Page 5... -
Page 7: Connection Via Web Browser
PC. See next sections for the instructions on how to access the LigoPTP 5-23 MIMO PRO management interfaces. Connection via WEB browser The default IP address of the LigoPTP 5-23 MIMO PRO is 192.168.2.66 with a subnet mask of 255.255.255.0. Step 1 Configure your PC with a static IP address on the 192.168.2.0 subnet with mask... -
Page 8: Resetting To Factory Defaults
For linux users: ping <IP address> -s 369 For Windows users: ping <IP address> -l 369 -t -w 200 -S <Computer IP address> Step 6. Power up device and wait about 30sec or more (depends from device hardware). LigoWave Page 7...
Need help?
Do you have a question about the LigoPTP 5-23 MIMO PRO and is the answer not in the manual?
Questions and answers