ToughShield R500+ Quick User Manual

Hide thumbs Also See for R500+:

Advertisement

Copyright © TOUGHSHIELD All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of TOUGHSHIELD.
The product described in this manual may include copyrighted software of TOUGHSHIELD and possible licensors. Customers shall not in any
manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.
Trademarks and Permissions
TOUGHSHIELD is a trademark or registered trademark of TOUGHSHIELD
Android is a trademark of Google Inc.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed, capacities and settings of the local network,
and therefore may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein
may not match exactly the product or its accessories you purchased.
TOUGHSHIELD reserves the right to change or modify any information or specifications contained in this manual without prior notice and
without any liability.
Safety Precautions
Please read these simple guidelines. Not following them may be dangerous or illegal.
ToughShield
R500+ Quick User Guide
Do not switch the phone on where Mobile Phone use is prohibited or it may cause
interference or danger.
Do not place your phone and its accessories in containers with strong electromagnetic
field.
Obey all traffic laws. Always keep your hands free, to operate the vehicle while driving.
Your first consideration while driving should be road safety.
Hospitals or health care facilities may be using equipment that could be sensitive to
external radio frequency energy. Follow all regulations and rules enforced.
Do not use the phone at a refueling station. Do not use near fuel or chemicals.
Follow all instructions. Wireless devices can cause interference in aircraft.
Keep the phone and all its parts, including accessories, out of the reach of children. Do
not use the phone while connected to the charger or with wet hand or bare feet.
Use only approved batteries and chargers. Disconnect the charger from the power source
when it is not in use. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life. Please remove the battery only after the
phone is switched off normally, otherwise it could cause unpredictable damage to the
phone.
Only qualified personnel should service the phone. Faulty service may be dangerous and
may invalidate any warranty applicable to the device.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R500+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ToughShield R500+

  • Page 1 ToughShield R500+ Quick User Guide Copyright © TOUGHSHIELD All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of TOUGHSHIELD. The product described in this manual may include copyrighted software of TOUGHSHIELD and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions TOUGHSHIELD is a trademark or registered trademark of TOUGHSHIELD Android is a trademark of Google Inc. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of the local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not match exactly the product or its accessories you purchased. TOUGHSHIELD reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability. Safety Precautions Please read these simple guidelines. Not following them may be dangerous or illegal. Do not switch the phone on where Mobile Phone use is prohibited or it may cause interference or danger.
  • Page 2: Dual Sim

    The R500+ offers the following features: 1. Toughshield Home Screen The Toughshield Home Screen provides faster and easier access to features and applications. It allows users to tailor the interface to improve their requirements and maximize efficiencies. 2. Dual SIM The R500+ is enabled with 2-SIM card slots for USIM/GSM use 3.
  • Page 3: Phone At A Glance

    Phone at a Glance SOS Button 3.5mm 5Mpx Camera PoC Button Audio Jack Up / Down Micro USB port Volume Button (Data / Charger) Power On/Off Button Camera Button Getting Started for the First Time The activation process is dependent upon your carrier. If you are using a GSM or UMTS carriers, you must install an appropriate SIM card prior to installing the battery.
  • Page 4 4. Installing a 3G SIM card. A. Place the R500+ on flat surface B. Using the screwdriver supplied, remove the securing screws C. Remove the Battery Cover C. Insert SIM card into WCDMA card slot 1, or GSM SIM card in slot 2 D.
  • Page 5 There is an approved 1500 mAh Li-ion Battery supplied Charge the Battery To charge the battery: 1. Select the appropriate adaptor connector of your country. 2. Plug the supplied Charging USB cable into the rectangular slot in the power supply. 3.
  • Page 6 Toughshield Home Screen The Toughshield Home screen provides a user interface that allows the user to quickly access information using customisable screens. Use your finger to slide the screen left to right or right to left to view additional screens.
  • Page 7 By default, the R500+ contains four screens - Home screen plus 3 additional screens Home Screen Press and hold finger on Home Screen => Dialogue Box will appear with 4 options that allows user to customise the screen (Shortcuts, Widgets, Folders and Wallpapers) Program Shortcuts Selecting the shortcuts option will take the user to a separate dialogue box (Applications, Bookmark, Contact, Direct Dial, Direct Message, Music Playlist, Settings)
  • Page 8 2. Use the on-screen dial-pad to enter the phone number. The number appears in the Call Line. 3. Press or tap the Green Handset Icon at he bottom of the dial-pad to start the call. 4. Press on the Red keypad to end the call. In-coming Call Screen “Answer”...
  • Page 9 4. In the Address field, enter a web address. Connect to a Bluetooth Device 1. Ensure the device you are connecting with is in discoverable mode. 2. Tap Settings => Wireless & networks 3. Select Turn on Bluetooth checkbox. 4. Tap the Bluetooth settings bar 5.
  • Page 10: Rf Exposure Information (Sar)

    including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. RF exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment。This equipment should be installed and operated with minimum distance 1cm between the radiator & your body. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. (FCC 15.21) RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.170W/kg and when worn on the body, as described in this user guide, is 1.178W/kg (Body‐worn measurements differ among phone models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: OHV‐R500PLUS.

Table of Contents