Denso PR-700UDM Operator's Manual page 6

To System Designers
 When introducing the PR-700UDM in those systems that could affect
human lives (e.g., medicines management system), develop applications
carefully through redundancy and safety design which avoids the feasibility
of affecting human lives even if a data error occurs.
Implantable Medical Equipment:
 A patient with implantable medical equipment (cardiac pacemaker, etc.) is
strongly advised to operate the PR-700UDM at least 12 cm away from the
said medical equipment. A survey conducted on the wireless card systems
has reported the possibility of their affecting or giving unfavorable impact
on implantable medical equipment.
This is a general characteristic of those systems using radio waves, and not
a unique feature of DENSO WAVE's products or the PR-700UDM itself.
Improper handling of the product against these warning precautions could result in overheating,
smoke, or malfunction. Be sure to observe the following when using this product.
 Do not contact metal objects with the terminal.
Doing so could produce a large current through the product, resulting in heat
or fire, as well as damage to the product.
 Do not use the voltages other than power voltage specified.
Doing so could cause the product to break or burn.
 Do not use the product in the presence of inflammable gases.
Doing so could cause fire or electrical shock.
 Do not use the product in places subject to strong vibration or shock.
Doing so could cause the product to break or burn.
 Do not use the product in places where the use of radio waves is restricted,
such as on airplanes or in hospitals.
Doing so may cause failure or malfunction in electronic or medical equipment.
 Do not scratch or modify the product or the USB cable. Do not heat, bend, twist
or pull the USB cable.
Doing so could break the product or the USB cable, resulting in fire.
 Do not drop or apply force to the product.
Doing so could cause the device to malfunction.
 Do not use the product in places where it is subject to sharp temperature
changes, dewing or steam.
Doing so could cause fire or electric shock.
 Avoid spilling liquid such as soft drink, coffee or water on the product.
Doing so could cause fire or electric shock.
 If the USB cable is damaged (e.g. exposed or broken lead wires), stop using it
and contact your nearest dealer.
Failure to do so could result in fire or electrical shock.
6