3 Getting Started
3.1 Parts List
Name
PR100 device
AC-DC Power
Adapter
PR100 Data and
charger Cable
3.2 Battery Charging
The following items are suggestion for battery charge, please pay more attention.
Please connect AC-DC power adapter with PR100 device.
Insert the AC-DC power adapter into the power socket.
During the charging process, the
fully charged, the
You can also charge the battery using USB cable which connects PR100 device
with the PC.
Charging will last about less than two hours.
Note: If the PR100 device is firstly used, please make sure the battery is fully charged,
which will make the life of battery much longer.
3.3 PR100 Data Cable
PR100 Data Cable is a cable with a Mini USB connector.
The USB data cable is used for firmware update or configuration and can be used for
Picture
The GSM/GPRS phone.
It is used to charge the internal battery of
PR100.
It is the USB data cable which can be used
for firmware upgrading and configuration.
It also includes the charger interface on the
PR100.
LED light
will be slow fashing blue.
LED light
5
Remark
will slow flash red. When the battery is