Summary of Contents for Prime PR100
- Page 1 PRIME PR100 User Manual Revision: 1.00 PR100 User manual Document Title 1.00 Version 2013-10-25 Finale Date Released Status PR100 Document Control ID...
-
Page 2: Table Of Contents
2.3 LED Description .........................4 3 Getting Started ..........................5 3.1 Parts List ..........................5 3.2 Battery Charging .........................5 3.3 PR100 Data Cable .......................5 3.4 How to insert SIM Card ......................6 3.5 Power on/Power off......................7 3.6 Calls ............................7 4 Trouble shooting and Safety info ....................8 4.1 Trouble shooting .........................8... -
Page 3: Introduction
1 Introduction PR100 is a mobile phone which mainly is used for emergency dialing with GSM frequencies 850/900/1800/1900. Based on the embedded wireless protocol, PR100 can communicate with the backend server through GPRS/GSM network, and transfer reports of emergency, gsm information and scheduled power level etc…... -
Page 4: Led Description
Click the key will turn off internal VBAT when OS is abnormal, and then Reset Key press Power Key to restart PR100. 2.3 LED Description Figure 1-2 There are red and blue LED lights in PR100 device, the description as following. Event Light State Power off Solid red... -
Page 5: Getting Started
PC. Charging will last about less than two hours. Note: If the PR100 device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer. 3.3 PR100 Data Cable PR100 Data Cable is a cable with a Mini USB connector. -
Page 6: How To Insert Sim Card
charging at the same time. Figure 2-1 3.4 How to insert SIM Card Figure 2-2 Step1: Screw off and pull out the cover of SIM card. Step2: insert the SIM card into the slot of the device according to the direction as shown. -
Page 7: Power On/Power Off
3.5 Power on/Power off Figure 2-3 Power on: Press the Power key at least 3 seconds and release it to power on PR100 device. Note that, the will be solid red and solid blue. LED light Power off: Power off is automated whilst 5 minutes later after the call. -
Page 8: Trouble Shooting And Safety Info
Too high temperature will damage the device or even cause the battery explosion. Please do not use PR100 on the airplane or near medical equipment. Warning statement This device complies with Part 15 of the FCC rules. Operation is subject to the...