Advertisement
BATTERY REQUIREMENTS / INSTALLATION FOR VEHICLE
To operate your vehicle you will need 6 x 1.5 Volt alkaline AA / LR6 batteries
(not included).
1. On the vehicle bottom, unscrew and remove the battery cover.
2. Take out all batteries from compartment and insert 6 new AA/LR6 batteries.
3. Close battery cover and tighten screw.
4. Turn power switch to the " I " (ON) position.
NOTE: THE BATTERIES INCLUDED IN THIS TOY ARE INTENDED FOR IN-STORE
DEMONSTRATION PURPOSE ONLY
For best performance, use of alkaline batteries is recommended.
Advertisement
