G4S S821 Installation And User Instructions

Installation and User Instructions for S821 Enrollment Readers
The S821 enrollment reader is used to encode Texas
Instruments (ISO 15693) smart cards using the
TM
"smartMAX" format.
1 Cable Connection
Insert the jack plug
into the box on the
end of the reader
cable.
Insert the power
plug into the box on
the end of the
reader cable .
Connect to a serial port
of a PC installed with the
SMS software. Set up the
port in the Install/Client
Ports screen of the SMS
software.
Connect the 12Vdc
power source to the
mains supply.