Smartwares C730IP Installation And Operating Instructions Manual page 2

Important Note
The state of the art Baby IP Camera HD is capable of delivering high quality Digital High Definition
(HD) video to your smart-mobile device(s), which would require higher internet bandwidth. Due
to your local internet environment condition, your mobile device(s) may display black-screen
or temporary disconnect to the camera.
Make sure the camera is operating with sufficient internet bandwidth,
*
download speed) is suggested.
* For best performance,
in order to receive maximum download speed.
* When the internet transmission is low,
Mode:
‧ By adjusting to "Better Streaming" in the system setting section may improve
the camera performance.
* Your internet bandwidth is limited.
connecting to the camera simultaneously.
Make sure your smart-mobile device(s) is equipped with up-to-date technology,
*
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak,
transmission:
‧ Change router/camera relative position to receive better signal.
‧ Use wire Ethernet cable on the camera to establish connection between camera and
your router.
‧ Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧ Switch your router to 11b/11g mode in order to improve router service range.
‧ Purchase extension cable or high gain antenna for your camera from the vendor.
* Please make sure the memory card used is CLASS10 rated.
the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
For best performance, try to avoid more than two users
your WAPP APP will automatically switch to Relay
there are several ways to improve
1Mbps (upload/
1.5GHz dual