Tire Information - Honda Civik Owner's Manual

MAINTENANCE
6. Insert the flat side of the new wiper
blade onto the bottom part of the holder.
Insert the blade all the way.
7. Install the end of the wiper blade into
the end cap.
8. Slide the wiper holder onto the wiper
arm securely.
9. Lower the passenger side wiper arm
first, then the driver side.
10. Set the power mode to ON and hold the wiper switch in the MIST positions
until both wiper arms return to the standard position.
Avoid dropping the wiper arm, as it may damage the windshield.
To Change the Rear Wiper Blade
1. Raise the wiper arm off.
2. Press and hold the tab, then slide the
holder off the wiper arm.
130 |
3. Pull the end of the wiper blade in the
direction of the arrow in the image until
it is out of the holder's end cap.
4. Pull the wiper blade in the opposite
direction to slide it out of holder.
5. Insert the flat side of the new wiper
blade onto the bottom part of the holder.
Insert the blade all the way.
6. Install the end of the wiper blade into
the cap.
7. Slide the wiper blade onto the wiper
arm until it locks.
8. Lower the wiper arm.
Avoid dropping the wiper arm, as it may damage the rear window.

Tire Information

To safely operate your vehicle, your tires must be of the proper type and size, in
good condition with adequate tread, and properly inflated.
Inflation Guidelines
n
• Properly inflated tires provide the best combination of handling, tread life,
and comfort. Refer to the driver's doorjamb label or the specifications see
SPECIFICATIONS for the specified pressure.
• Underinflated tires wear unevenly, adversely affect handling and fuel
economy, and are more likely to fail from overheating.
• Overinflated tires make your vehicle ride harshly, are more prone to road
hazards, and wear unevenly.
• Every day before you drive, look at each of the tires. If one looks lower
than the others, check the pressure with a tire gauge.
MAINTENANCE
| 131