Acura NSX Owner's Manual page 89

MAINTENANCE
2. While holding the wiper switch in the MIST
position, set the power mode to ON, then to
VEHICLE OFF. Both wiper arms are now set
to the service position.
3. Lift the driver side wiper arm first, then the
passenger side.
166 |
4. Press and hold the tab, then slide the holder
off the wiper arm.
5. Pull the end of the wiper blade in the
direction of the arrow in the image until it
unfastens from the holder's end cap. Pull the
wiper blade to the opposite direction to slide
it out from its holder.
MAINTENANCE
| 167