Advertisement
Once you have determined the irradiation time you are ready to enter in the time
and perform the irradiation as follows:
1. Place the specimen in the chamber. For small animals, place the HEPA
filtered cage within the RAD+ block. For non-animal specimens, place the
shelf plate at the level desired and place the specimen on the plate.
animal cage placed inside RAD+ block
2. On the Main Menu you will select PROGRAM SETUP if you have not
already programmed an irradiation time in for one programs (A, B, C, or D). If
you have already programmed in an irradiation time go to Step 3.
After selecting PROGRAM SETUP, the following screen (AUTO PROGRAM
SETUP) will appear (Programs C and D can be seen by pressing NEXT);
For the Program you wish to program an irradiation time for, press MIN or
SEC and a keypad will appear on the display which allows entry of the
irradiation time. Once the time has been entered, press MAIN to return to
the main menu.
3. On the Main Menu, choose PROGRAM SELECT and the following window
will appear:
ENT=enter,
ESC=escape
Advertisement
