Advertisement

Quick Links

IMPORTANT SERVICE INFORMATION

Read this manual before attempting to setup or use this instrument. It contains important
information regarding safe installation and use. Keep this manual for future reference. Also
save the carton, packing and proof of purchase to simplify and accelerate any needed action.
If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m.
Pacific Standard Time, Monday through Friday. You can also visit our web site at
http://www.nwbphones.com for technical support and information on our other products.
WARNING
To prevent fire or shock hazard, do not expose this product to rain or any type of excess
moisture. If accidentally dropped into water, the AC adapter should immediately be
unplugged from the wall along with the telephone line cord.
THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE OWNER'S MANUAL.
1
OWNER' S MANUAL # 36122 ver. 112803A-1
Page: 1 ENGLISH VERSION
®
Excursion
36122

CARTON CONTENTS

• 36122 Base and Handset
• Rechargeable Ni-Cd Battery Pack
• Telephone Line Cord(Short and Long)
• AC Adaptor
• User' s Manual
• Warranty Card
• Accessory Order Form
• Wall Mount Screws and Hardware
112803A-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 36122 and is the answer not in the manual?

Questions and answers

Summary of Contents for EXCURSION 36122

  • Page 1: Important Service Information

    • Rechargeable Ni-Cd Battery Pack • Telephone Line Cord(Short and Long) • AC Adaptor • User’ s Manual • Warranty Card • Accessory Order Form • Wall Mount Screws and Hardware 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 1 ENGLISH VERSION...
  • Page 2: Important Safety Instructions

    12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power supply cord or plug is damaged or frayed. If liquid has been spilled into the product. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 2 ENGLISH VERSION...
  • Page 3: Installation Precautions

    Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 3 ENGLISH VERSION...
  • Page 4: Fcc Notice

    You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes to its facilities, equipment, 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 4 ENGLISH VERSION...
  • Page 5 [equipment ID] does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 5 ENGLISH VERSION...
  • Page 6 TV or VCR will often reduce or eliminate the interference. AC ADAPTOR: Use only with Class 2 Transformer, 9VDC output , 400mA for base unit and 200mA for charger, center pin positive. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 6 ENGLISH VERSION...
  • Page 7: Charge Led

    TALK Button Cordless phone CHARGE G H z Handset 2 CHARGE LED Indicator Base Unit (Rear View) 9VDC400mA DC 9V Jack LINE Jack DC 9V Jack Tone/ Pulse Switch 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 7 ENGLISH VERSION...
  • Page 8: Handset Control

    MENU/SCAN –While in standby mode, this button allows you to set the handset in Programming mode. While in Talk mode. It is used to manually select one of the 40 operating channels when you experience interference on the handset. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 8 ENGLISH VERSION...
  • Page 9: Base Unit Controls

    Remove the battery compartment cover of the handset by pressing the top of the cover and sliding it down. Connect the Ni-Cd battery pack plug along the slot into the handset’ s battery connector as shown below. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 9 ENGLISH VERSION...
  • Page 10 Figure2. Slide the other hook until it locks into place from the opposite side of the handset. Belt clip hook (Figure 2) 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 10 ENGLISH VERSION...
  • Page 11 Drive a screw into each of the holes. Tighten them to the end of the screw lines, only leaving the smooth part of the screw head outside the wall. Hand the unit onto the screws, then slide it down firmly to fasten the base securely. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 11 ENGLISH VERSION...
  • Page 12: Power Connection

    When you plug in the headset into the headset jack, it automatically mutes the microphone and speaker of the handset. Unplug the headset to return the handset to normal use. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 12 ENGLISH VERSION...
  • Page 13: Initial Setup

    When finished with your call, press the TALK button or place the handset on the base unit. NOTE: The call timer will start to count once you press the TALK button. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 13 ENGLISH VERSION...
  • Page 14: Saving In The Phonebook

    When finished with your call, press the TALK button or place the handset on the base unit. SAVING IN THE PHONEBOOK Press the SA/MEMO button. Press the FLASH/EDIT button. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 14 ENGLISH VERSION...
  • Page 15: Blocked Calls

    Press the MEMU/SCAN button twice. The LCD Display will show “REJ”. Press the SA/MEMO button to save the preferred call and go back to STANDBY mode. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 15 ENGLISH VERSION...
  • Page 16: Telephone Keypad Characters

    If you want to change any character, you can go back to the incorrect character by pressing the SHIFT LEFT button. To delete the character inside the cursor “ ”, press the RE/PA/DEL button. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 16 ENGLISH VERSION...
  • Page 17 Press and hold the SHIFT LEFT or RIGHT button to move the cursor to the number you want to change. To erase, press the RE/PA/DEL button. To add, use the TELEPHONE KEYPAD buttons(0-9). 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 17 ENGLISH VERSION...
  • Page 18: Deleting A Stored Number

    Pulse position. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 18 ENGLISH VERSION...
  • Page 19 20 seconds and LCD Display shows “PAGING” while it is being paged by the base unit. NOTE: Even if the handset is in RING OFF mode, the base unit can page the handset. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 19 ENGLISH VERSION...
  • Page 20: Caller Id Operation

    If you have owned a cordless in the past, you will discover that the 36122 telephone is the most powerful and full-functioned Call Waiting ID cordless telephone on the market, some key features are: •...
  • Page 21: Receiving New Call

    Press CALLS button to finish. NOTE: If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to STANDBY mode. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 21 ENGLISH VERSION...
  • Page 22 9:07 12/25 N EW TOTAL NO CALLS This is displayed when CALLS button is pressed and there is no Caller ID date stored. 9:07 12/25 N EW TOTAL 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 22 ENGLISH VERSION...
  • Page 23 If the number displayed is not correct(needing 7,10,11 digits), press the OPTION button to select call number. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 23 ENGLISH VERSION...
  • Page 24: Selective Deleting In The Caller List

    Press the CALLS button Press the UP button to scroll to the call record you wish to delete. Press RE/PA/DEL button. The LCD Display will show “ERASE ITEM?” 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 24 ENGLISH VERSION...
  • Page 25: Deleting All Records In The Caller List

    ON or OFF. RING ON is the preset mode. 5. Press the SA/MEMO button to save the setting. 6. Press the MENU/SCAN button to go back to standby mode. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 25 ENGLISH VERSION...
  • Page 26 E. AREA CODE AREA CODE 1. Press and hold the MENU/SCAN button. - - - 2. Press the TELEPHON KEYPAD #5 button. TOTAL 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 26 ENGLISH VERSION...
  • Page 27 6. Press the MENU/SCAN button to go back to STANDBY mode. I. PRIVATE RING ON/OFF Turn on or off ring or all calls where the caller has blocked their caller ID. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 27 ENGLISH VERSION...
  • Page 28 1. Press and hold the MENU/SCAN button. 2. Press the button once. TOTAL 3. Press the SA/MEMO button to save the setting. 4. Press the MENU/SCAN button to go back to standby mode. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 28 ENGLISH VERSION...
  • Page 29: Improving Cordless Reception

    • Keep the handset batteries charged as much as possible. Weak handset batteries can limit the range of cordless operation. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 29 ENGLISH VERSION...
  • Page 30: Maximizing Battery Life

    CHARGING ® Make sure the adapter and telephone line cord are connected to the Excursion 36122. Place the handset on the base cradle. The CHARGE LED indicator of the base unit will light steadily.
  • Page 31 You can check for interference before selecting the final base unit location by plugging in the phone. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 31 ENGLISH VERSION...
  • Page 32: Telephone Unit Troubleshooting Table

    Refer to the section “ Improving Cordless Reception”. • Calls received flutters The handset rechargeable Ni-Cd battery pack may need or fades charging. • Choose an alternate channel using the MENU/SCAN button on the handset. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 32 ENGLISH VERSION...
  • Page 33 • Interference on Refer to the section “Improving Cordless Reception”. reception • Excessive static Refer to the section “Improving Cordless Reception”. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 33 ENGLISH VERSION...
  • Page 34 9VDC, 400mA for base unit and 200mA for charger . THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER’S MANUAL. 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 34 ENGLISH VERSION...
  • Page 35 Distributed Exclusively Worldwide by Unical Enterprises, Inc., Industry, California, USA 36122/062803A-1 www.nwbphones.com 112803A-1 OWNER’ S MANUAL # 36122 ver. 112803A-1 Page: 35 ENGLISH VERSION...

Table of Contents