Table of Contents
Advertisement
Press
START
If the phone does not find an infrared-capable device, it
changes the right soft key (
Press
START
To break the infrared data connection, press STOP (
You can also move the device away from the phone, turn
off the device, or turn off the phone. If your phone moves
away from a connected device while it is still on, it will try to
re-connect for 30 seconds after the connection breaks.
Setting Up a Bluetooth Connection
Before connecting your phone to another Bluetooth
device, set up the other device as described in its user
guide.
For a PC, set up the Bluetooth accessory card, card
drivers, and application software. If you want to use
Dial-up Networking Services, configure them for the
Bluetooth modem as described in the software and
modem user guides.
Notes:
• Your phone must be within 33 feet (10 meters) of the
other device. Nothing can block the line of sight
between the two devices.
140
+
(
)
+
(
)
To
activate the infrared link
+
) from STOP to START .
To
try another connection
+
).
Advertisement
Table of Contents
