Troubleshooting; Gps; Factory Reset - Recon Snow2 User Manual

Troubleshooting
GPS
GPS technology works best in open spaces with a clear view of the sky. Obstructions such as buildings
and trees can degrade the GPS signal. Your Recon HUD will automatically acquire a GPS fix each time
you use your Recon HUD.
Searching for GPS
GPS Fix acquired
If you are having difficulty acquiring a GPS fix, this may be due to several varying factors:
‐ your device is used indoors
‐ your device is trying to acquire a GPS fix for the first time
‐ your device has not been used for an extended period of time
If you have difficulty acquiring a GPS fix try powering down the HUD and restarting it outdoors (away
from obstruction if possible).
Factory Reset
A factory reset clears all data that your Recon HUD has recorded. It also unpairs the remote, clears your
settings, uninstalls any third‐party apps, and restores the device back to the default settings and original
firmware the HUD was shipped with.

To perform a factory reset, go to Settings > Advanced > Factory Reset

If you are unable to access Settings, please read the instructions below to perform the manual
factory reset procedure using the Recon HUD power button and remote.
Follow each step promptly to ensure reset is successful. If you miss any steps, please start again.
1. Power off your device before proceeding.
2. Open the micro USB cover to expose the LED charging light.
3. Press and hold the Recon HUD power button until the red LED charging light blinks.
4. Let go of the power button ‐ the red LED will start to flash quickly.
5. While the red LED light is flashing, press and hold the Recon HUD power button for 3 seconds.
6. Let go of the power button ‐ the red and blue LED lights will blink in unison.
7. Press the power button once to initiate the factory reset ‐ a white box and an Android icon will
appear on the display (this may take 2‐3 minutes to complete).
Note: you will need to pair your remote with your HUD after the factory reset is complete.
14
GPS signal will be flashing
GPS arrow will replace the satellite