Related Manuals for Baltech ACCESS100
Summary of Contents for Baltech ACCESS100
- Page 1 Operation Manual REVISION 1.0, 2013-07-02 Confidential information, all rights reserved. BALTECH AG Lilienthalstraße 27 85399 Hallbergmoos Germany Phone: +49 (811) 99 88 1- 0 FAX: +49 (811) 99 88 1- 11 e-mail: info@baltech.de http://www.baltech.de/...
-
Page 2: Mounting And Connection
10023-155-51 10023-001 10023 The “ACCESS100” is a multifunctional contactless smart card RFID Read-/Write-Device (short: reader). The reader supports Mifare, ISO14443A/B, ISO15693 and all cards compliant to these standards. It provides serial interface RS485/ RS232 or a Wiegand Interface to exchange data with a host computer and a 13.56MHz inductive interface to supply power to and exchange data with the... -
Page 3: Operation
J5: Screw-Clamp, pluggable, 9-Pole. Alternative, potted devices: pigtail cable 1m length. RS485 / Wiegand Pin# Color Name Description Black Power and Signal GND Supply Voltage (9…30 VDC) +VIN Blue Mult_A: 485/WIE_D0 RS485 A or Wiegand data 0, depending on configuration Pink Mult_B: 485/WIE_D1 RS485 B or Wiegand data 1, depending on configuration... -
Page 4: Technical Data
Technical Data 9…30 VDC Supply Voltage: Power consumption : 1.0 W typ. 2.0 W max. Operating temperature : -25 to + 65 C° Operation frequency 13.56 MHz Additional requirements for the supply voltage: Vripple = 50mVpp max. RF Characteristics Operating frequency: 13.56 MHz ... - Page 5 General regulatory requirements FCC Compliance Statement: This device complies with Part 15 of the FCC rules. The product FCC ID is OKY1002300101A02B. The operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.