10023-155-51 10023-001 10023 The “ACCESS100” is a multifunctional contactless smart card RFID Read-/Write-Device (short: reader). The reader supports Mifare, ISO14443A/B, ISO15693 and all cards compliant to these standards. It provides serial interface RS485/ RS232 or a Wiegand Interface to exchange data with a host computer and a 13.56MHz inductive interface to supply power to and exchange data with the...
J5: Screw-Clamp, pluggable, 9-Pole. Alternative, potted devices: pigtail cable 1m length. RS485 / Wiegand Pin# Color Name Description Black Power and Signal GND Supply Voltage (9…30 VDC) +VIN Blue Mult_A: 485/WIE_D0 RS485 A or Wiegand data 0, depending on configuration Pink Mult_B: 485/WIE_D1 RS485 B or Wiegand data 1, depending on configuration...
Technical Data 9…30 VDC Supply Voltage: Power consumption : 1.0 W typ. 2.0 W max. Operating temperature : -25 to + 65 C° Operation frequency 13.56 MHz Additional requirements for the supply voltage: Vripple = 50mVpp max. RF Characteristics Operating frequency: 13.56 MHz ...
Page 5
General regulatory requirements FCC Compliance Statement: This device complies with Part 15 of the FCC rules. The product FCC ID is OKY1002300101A02B. The operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.