Page 3
Southern States, LLC ICS Installation and Instruction Manual Contents Warnings, Cautions, and Important Information..................3 System Overview ............................4 Sensor Module.............................4 Receiver Module..........................4 Interface Module ..........................5 Analog Output Module ........................5 Installation..............................5 Mounting and Wiring..........................5 Configuration............................6 Maintenance............................6 Specifications...............................6 Troubleshooting ............................6 Page 2...
Page 4
If you do not understand any part of these instructions or need assistance, contact Southern States Service Division at 770-946-4562 during normal business hours (EST) or 770-946-4565 after normal business hours.
Page 5
System Overview The purpose of the ICS receiver module is to receive high-voltage power system data (e.g. current and voltage), digitally transmitted via a local RF connection from a power line to the ground, where it is analyzed and acted upon. The ICS system is comprised of a Sensor Module, a Receiver Module, an Interface Module, and an optional Analog Output Module.
Page 6
4. Select the channels assigned to the matching sensors recommended by the factory or search for available sensors in the ICS configuration tool. 5. The ICS receiver module may only be used with other ICS hardware has the proprietary software to communicate properly.
Page 7
1. Use the provided network cable to connect a laptop to the Interface module. Or download the Southern States ICS App to connect to the Interface module via the RJ45 or ST fiber Ethernet jack. Be sure that the Interface module is powered on properly.
Page 8
Southern States, LLC ICS Installation and Instruction Manual Notices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the ICS and is the answer not in the manual?
Questions and answers