About Mysmartblinds - MySmartBlinds AUTOMATION KIT User Manual

frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following mea-
sures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV
technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF
exposure requirement. The device can be used in por-
table exposure condition without restriction.
8

ABOUT MYSMARTBLINDS

MySmartBlinds is a retrofit blinds-automation kit that
uses Bluetooth technology to control tilting in your
existing blinds.
MySmartBlinds fits inside 2-inch horizontal
blinds* and is compatible with Apple devices running
iOS 7 or later (iPhone 4s or newer, iPad 3rd generation
or newer, iPod touch 5th generation or newer, and
Apple Watch) and Android devices with Bluetooth L.E.
support operating OS 4.3 or later.
Visit mysmartblinds.com/installation for a PDF
version of this manual.
*Compatible with 2-inch blinds between 20" and 72" wide with a mini-
mum space of 5" between barrels, or 9" between barrels if the headrail
has only two barrels (see Figures 1 and 2 on page 35). Not compatible
with cordless lift blinds.
9