Xtool HD900 User Manual page 3

The HD900 work in 11V~36V voltage, please
1.
make sure the diagnostic socket on your vehicle
export 11V~36V voltage.
Please pinch the non-slip grooves but not draw
2.
the middle section of the harness when plugging
or pulling out the diagnostic connector. Please
plug the connector vertically to the DLC PORT.
Do not plug it slantly in case terminal damage.
Do not test the car with harness that is not from
3.
XTOOLTECH in case of any loss.
When HD900 is communicating with the car, do
4.
not take out the connector directly. Please cancel
the task AND go back to main menu, and then
take out the connector.
Be gently to avoid vibration or shock when
5.
operating HD900.
When you stop using HD900, please take it out
6.
from the diagnosis port of the car.
Ensure the temperature of operating
7.
environment is -20℃ to 50℃.
HD900
3