Belkin 802.11g User Manual page 13

CONNECTING THE BRIDGE USING THE SETUP WIZARD
10. Enter the IP address settings for your Bridge. The current settings will
usually work. Click "Next" to continue.
Warning: It is recommended that you only make changes to this page if you
have a specific reason to do so.
a. IP address:
The IP address must be unique to your network. Default IP address
is 192.168.2.225.
b. Subnet Mask:
The Bridge's Subnet Mask must be the same as your network's subnet mask.
c. Gateway:
Enter the IP address of your network's gateway (also known as router).
10
a
b
c