Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Balluff IP67
Summary of Contents for Balluff IP67
- Page 1 Power Only System 500 mA, IP67 User´s Guide...
-
Page 2: Table Of Contents
Technical Data Remote 7.1. Dimensions – Remote 7.2. Mechanical Data – Remote 7.3. Operating Conditions – Remote 7.4. Electrical Data – Remote Accessories 8.1. Connectors 8.2. Mounting Accessories Type Designation Code 9.1. Type Designation Code 9.2. Order Code Notes www.balluff.com... -
Page 3: Notes
Balluff Network Interface Notes 1.1. Scope of this This manual describes the construction, function and installation of the Balluff Power Only manual inductive coupler. It applies to the following models: Base BIC 1P0-P2A50-M30MI3-SM4A4A and Remote BIC 2P0-P2A50-M30MI3-SM4A5A (see type designation code) The manual is intended for qualified technicians. -
Page 4: Safety
2004/108/EC (EMC) and the EMC law. In our EMC laboratory, which is accredited by DATech for testing electromagnetic compatibility, evidence has been provided that the Balluff products satisfy the EMC requirements of the generic standards: EN 61000-6-4 (Interference emission) and EN 61000-6-2 (Immunity to interference) www.balluff.com... -
Page 5: Construction And Function
Balluff Network Interface Construction and Function 3.1. Construction The system is designed for applications with energy transmitting. It consists of the following two components: − Base (transmitter) − Remote (receiver) The components are enclosed in a brass housing protected acc. to IP 67 3.2. -
Page 6: Indication
Indicators Function Green – static Supply voltage OK Green – flashing Supply voltage too low 4.2. Remote indicators Status indicator "Power on" Indicators Function Green – static Supply voltage OK Green – flashing No connection between base and remote, www.balluff.com... -
Page 7: Installation And Connection
Balluff Network Interface Installation and Connection 5.1. Mutual Note! Interference Improper mounting may affect the function of the system and lead to damage. The spacings specified for installation must be adhered to. To prevent mutual interference with adjacent bases or remotes, the specified minimum... -
Page 8: Connection
Power (M12, 4 pin-male plug) Signal Meaning +24 V Input voltage Not used Ground Not used Power (M12, 5 pin-female plug) Electrical Signal Meaning connections - +24 V Output voltage remote Not used Ground Not used Not used Connection diagram Consumer www.balluff.com... -
Page 9: Technical Data Base
Balluff Network Interface Technical Data Base 6.1. Dimensions – Base 6.2. Mechanical Data – Housing material Brass Base Degree of protection per IEC 60529 IP 67 (only in plugged-in and screwed-down state) Connection type M12, A-coded Dimensions (D x L in mm) -
Page 10: Technical Data Remote
Operating temperature T -5 °C…55 °C Storage temperature -25 °C…75 °C 7.4. Electrical Data – Operating voltage 24 V DC ±5 % Remote Output current 500 mA Short-circuit protected Output peak current Max. 800 mA Operational readiness < 100 ms www.balluff.com... -
Page 11: Accessories
Balluff Network Interface Accessories 8.1. Connectors BCC-M415-0000-1A-064-PX0234-XXX XXX -> cable length For Base BCC-M425-0000-1A-064-PX0234-XXX XXX -> cable length For Base BCC-M413-0000-2A-064-PX0234-XXX XXX -> cable length For Remote BCC-M423-0000-2A-064-PX0234-XXX XXX -> cable length For Remote 8.2. Mounting BES 30,0-BS-1 BES 30-HW-1 Accessories www.balluff.com... -
Page 12: Type Designation Code
Type Designation Code 9.1. Type Designation BIC 1P0-P2A50-M30MI3-SM4A4A Code Balluff Inductiv Coupler Base (1) Remote (2) P0 = Power Only Technology (PNP), variant (24 V), power class (500 mA) Housing shape (M30x1,5) Housing material (M = brass) and length Male M12, axial Number of pins and coding 9.2. -
Page 13: Notes
Balluff Network Interface Notes www.balluff.com... - Page 14 Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.F. Deutschland Tel.: 07158 173-0 Fax: 07158 5010 www.balluff.com balluff@balluff.de...
Need help?
Do you have a question about the IP67 and is the answer not in the manual?
Questions and answers