Specification - LG PB63U Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the DLP Projector with FM21B chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE PROJECTOR test method followed
(2) Demanded other specification
Safety : UL, CSA, IEC, CE specification (EN55022 Class B)
EMC : FCC, ICES, IEC, CE specification (EN60950-1)
4. Model General Specification
No Item
1 Video input applicable system
2 Power
3 Input Voltage
4 Market
5 Picture size
6 Aspect ratio
7 Operating Temperature
8 Operating Humidity
9 Storage Temperature
10 Storage Humidity
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
Min Max
1) NTSC M
2) PAL-B,D,G,H,I
3) PAL M
4) PAL N
5) PAL 60
6) SECAM
Adapter - DC 19.5V @ 4.62A (90W)
AC 100 ~ 240(± 10 %)V, 50/ 60Hz
US
WXGA (1280 x 800)
16:10
0 40
80
-20 60
85
- 4 -
Remark
Unit
3.579545 / 60 Hz
4.433618 / 50 Hz
3.575611 / 60 Hz
3.582056 / 50 Hz
4.433618 / 60Hz
Panel Resolution
deg
%
deg
%
LGE Internal Use Only