Samsung SGH-S108 User Manual page 77

Setting Up the WAP Browser
Parameter Description
Security Data transmission mode. Choose
Secure to protect your data
against unauthorised access;
otherwise, choose Non-Secure.
IP Address WAP gateway address required to
connect to the Internet.
Bearer Bearer to be used for each type of
network address accessed: GPRS
or Data.
The remaining options depend on the Bearer
setting, as indicated below.
When the bearer is set to Data
Parameter Description
Login PPP server login ID.
Name
Password PPP server password.
Dial-up PPP server phone number.
Number
Data Call Data call type: Analogue or
Type ISDN.
When the bearer is set to GPRS
Parameter Description
User Name User ID required to connect to the
GPRS network.
Password Password required to connect to
the GPRS network.
APN Access point name used for the
address of the GPRS network
gateway.
8
Note: The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for further information.
3. After selecting each of these settings, a dialog
box is displayed; you can either enter the
information required or choose between given
options. When you are satisfied with your input,
press the OK soft key.
4. When you have finished configuring the WAP
Browser, press the
key.
Setting Up the WAP Browser
key or the right soft
9