Subscribe to Our Youtube Channel
Related Manuals for Jumpking BACKYARD
Summary of Contents for Jumpking BACKYARD
- Page 1 BACKYARD Hanging Set Got a Problem building your Hanging set or request a full range of accessories and replacement parts. Please call 0344 800 4060 or visit our website at: www.jumpking.eu...
- Page 2 IMPORTANT INFORMATION . WARNING! ADULT SUPERVISION & GUIDANCE REQUIRED AT ALL TIMES. . Recommended age 3+ years. WARNINGS! . Only for domestic use. . Maximum user weight limit 45kg. . Not suitable for children under 3 years - small parts, choking hazard. .
-
Page 3: Care And Maintenance
CARE & MAINTENANCE Regular care and maintenance of your product is required. This will help prolong its life and reduce the possibility of injury. Neglecting this can lead to a risk for users. Inspect your product before each use using the checklist below as a guide. Take particular care in doing this at the start of each season and at regular intervals. -
Page 4: What You Will Need
BUILDING YOUR UFO SWING SET 1. This is a 2 person build. 2. Time for build is approximately 1 hour. 3. Choose a good location: Suggest on a level surface that is soft (wood chippings, sand or grass). (7.3m) from ground level, away from wires, trees and other possible hazards. -
Page 5: Parts List
Quantity: 4 pcs Quantity: 4 pcs Part 13 Part 14 Part 15 Part 16 Description: Description: Description: Description: Jumpking logo Ropes Hanging seat top rail Hanging seat sticker Quantity: 1 set Quantity: 4 pcs Quantity: 1 pc Quantity: 2 pcs... - Page 6 PARTS LIST Part 17 Part 18 Part 19 Part 20 Description: Description: Description: Description: Clip Screw set for Expandable screw Metal peg Quantity: 2 pcs Hanging seat toprail Quantity: 4 pcs Quantity: 8 pcs Quantity: 4 sets...
- Page 7 Assemble the frame according to below diagram: Make sure the metal pegs insert into ground. 55mm screw (A) *Paste the Jumpking sticker on top tubing 45mm screw (B) A marking B marking D marking D marking C marking C marking...
- Page 8 Insert the tubing into the seat fabric. Completed Use mallet to x the metal peg to the ground.
Need help?
Do you have a question about the BACKYARD and is the answer not in the manual?
Questions and answers