Power Management Modes - Dell C5519Q User Manual

Power management modes

If you have VESA's DPM™ compliance display card or software installed in your
PC, the monitor can automatically reduce its power consumption when not in
use. This feature is called Power Save Mode*. If the computer detects input from
the keyboard, mouse or other input devices, the monitor automatically resumes
functioning. The following table shows the power consumption and signaling of this
automatic power saving feature.
VESA modes
Normal operation
Active-off mode
(Ehernet not turn
on)
Active-off mode
(Ehernet turn on)
Switch off
Energy Star
P
on
E
TEC
* Zero power consumption in off mode can only be achieved by disconnecting the
AC main cable from the monitor.
** Maximum power consumption with maximum luminance.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: The message may be slightly different according to the
connected input signal.
Horizontal Vertical
sync sync
Active Active
Inactive Inactive
Inactive Inactive
- -
Power consumption
85 W
116 W
Power
Video
indicator
Active White
Blank White
(Glowing)
Blank White
(Glowing)
- Off
About your monitor
Power
consumption
200 W
(Maximum)**
90 W (Typical)
Less than 0.5 W
Less than 2 W
Less than 0.5
W*
17
|