Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PERCo WHD-16
Summary of Contents for PERCo WHD-16
- Page 1 Full Height Security Gate WHD-16 INSTALLATION AND OPERATION MANUAL...
- Page 2 Full Height Security Gate WHD-16 Installation and Operation Manual...
-
Page 3: Table Of Contents
CONTENT APLICATION ....................... 3 OPERATION CONDITIONS ..................3 TECHNICAL SPECIFICATIONS ................. 4 DELIVERY SET ......................5 Standard delivery set ..................... 5 Optional equipment ....................5 DESIGN AND OPERATION ..................8 Main features ......................8 Design and operation .................... 8 MARKING AND PACKAGING ..................9 SAFETY REQUIREMENTS .................. -
Page 4: Aplication
ACS — access control system. 1 APLICATION The WHD-16 full height security gate is designed for management of pedestrian flows and access control at entrance points of facilities and areas with high security requirements and necessity for full vertical closure of the passageway. -
Page 5: Technical Specifications
Installation and Operation Manual 3 TECHNICAL SPECIFICATIONS Electromechanical lock: Operating voltage ................. 11.5÷14 V DC (AC) Consumption current ..................... 3 A Power consumption .................... 36 W Throughput rate in the single passage mode ..........12 persons/min Average daily throughput in the single passage mode ......2,000 persons/day Passageway dimensions (H ×... -
Page 6: Delivery Set
WHD-16 Full Height Security Gate 4 DELIVERY SET 4.1 Standard delivery set Primary parts: Assembled gate with rim electromechanical lock ............1 Set of keys to electromechanical lock ............... 1 Door closer with fasteners ..................1 Assembling tools: Hex key SW4 ......................1 Technical documentation: Gate installation and operation manual .............. - Page 7 Installation and Operation Manual Figure 1. General view of the WHD-16 gate 1 – frame; 2 – leaf; 3 – electromechanical lock; 4 – door closer...
- Page 8 WHD-16 Full Height Security Gate Figure 2. Overall dimensions of the WHD-16 gate...
-
Page 9: Design And Operation
Installation and Operation Manual 5 DESIGN AND OPERATION 5.1 Main features possibility of remote gate unlocking; leaf reset by a hydraulic door closer after the passage; wide passageway to provide controlled passage for people in wheelchairs (with an attendant) and deliveries of large or bulky items; Combined coating of all gate elements with zinc and powder paint ensures high corrosion resistance and long years of service in harsh environments;... -
Page 10: Marking And Packaging
WHD-16 Full Height Security Gate 6 MARKING AND PACKAGING The gate marking contains the product name, its date of manufacture and serial number. Optional accessories and items are marked according to their respective technical documentation. The standard delivery set is packed into a package box to protect the gate from damage during storage and transportation. -
Page 11: Installation
Installation and Operation Manual 8 INSTALLATION Attention! The manufacturer will not accept liability for any damage to the gate or other equipment, or otherwise loss caused as a result of improper installation, and will dismiss any claims by the customer should the installation work be carried out not in accordance with this Manual. -
Page 12: Installation Of The Gate
5. extension sections of the full height railing; 6. the turnstile protective canopy. Contact PERCo Technical Support Department if you need further consulting. 8.4 Installation of the gate Further in this section each installation operation is described in compliance with the above guidelines (sect. - Page 13 Installation and Operation Manual Figure 4. Recommended connection layout of the lock 7. When the gate is operating in the ACS to monitor of the "Closed" position it is recommended to install a door sensor (reed switch). The magnetic part of the sensor is installed in the leaf (it is recommended the upper part of the leaf), and the sensor itself is installed in the gate frame.
-
Page 14: Operation Instructions
WHD-16 Full Height Security Gate 9 OPERATION INSTRUCTIONS DON’TS: DO NOT carry through the gate items exceeding the passageway dimensions; DO NOT subject the gate to strong impact; DO NOT clean the gate with substances that may cause damage or corrosion of its parts. -
Page 15: Transportation And Storage
Installation and Operation Manual 10 TRANSPORTATION AND STORAGE The gate in the original package should be transported in closed freight containers or other closed type cargo transport units. During storage and transportation the boxes can be stacked no more than 2 layers high. The gate should be stored indoors at ambient temperature from –40°C to +45°C and relative air humidity below 98% at +25°C. - Page 17 PERCo Polytechnicheskaya str., 4, block 2 194021, Saint Petersburg Russia Tel: +7 812 247 04 64 E-mail: export@perco.com support@perco.com www.perco.com...
- Page 18 www.perco.com...
Need help?
Do you have a question about the WHD-16 and is the answer not in the manual?
Questions and answers