Safety Instructions - Dialight IntelliLED Quick Start Manual

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• Refer to operating temperature ratings of this device before installing.
• DO NOT let the Enterprise Server touch hot surfaces.
• DO NOT mount near gas or electric heaters.
• Equipment should be mounted in locations and at heights where it will not
be subjected to tampering by unauthorized personnel.
• The use of accessory equipment not recommended by the manufacturer
may cause unsafe conditions.
• DO NOT use this equipment for other than intended use.
• DO take pictures of the installation and mounting for future reference.
• Contact your local Sales representative or Dialight when necessary.
• The installation and maintenance must be carried out by authorized
personnel.
• Repairs and installation must only be carried out by a qualified electrician.
• Only genuine or authorized Dialight replacement parts must be used when
unforeseen repairs are required.
• Observe the national safety rules and regulations during installation.
• Mounting in extreme heat locations should be avoided. Failure to do so
could void all warranties.
• No alterations are allowed without the written agreement from Dialight
Corp. Alterations other than written in this manual will void all warranties.
SAVE THESE INSTRUCTIONS!
www.dialight.com
IntelliLED Enterprise Server
TM
3