PEUGEOT BOXER Handbook page 160

Puncture
removing the wheel to be repaired
- Remove the trim (depending on version)
using the screwdriver E as a lever.
- Release the bolts using the
wheelbrace d and the bar B.
- Position the jack c at one of the four
locations provided on the underbody
near the wheels.
If your vehicle has a folding foot board, the
jack must be positioned at 45°.
- extend the jack using the wheelbrace d
and trhe bar B until the wheel is a few
centimetres off the ground.
- unscrew the bolts fully and remove the
wheel to be repaired.