Advertisement
Instructions (cont'd.)
6. Stand the frame upright. This should be done with at least two people.
7. Square rack using a level or carpenter square and tighten the assembly bolts.
8. Take the 1/4"-20 hex nut and place and tighten them over the studs inside each mounting rail.
(Do not over tighten). See Detail B.
1/4"-20
Hex Nut
Detail B
B
Rack frame has to be bolted to the floor before equipment is mounted.
www.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: 310-898-1100; Fax: 310-898-1111
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK4000 Instructions
Page 2
P35779
Advertisement
