Related Manuals for Tornado HI-FAN-W16DIGIT-1P
Summary of Contents for Tornado HI-FAN-W16DIGIT-1P
- Page 1 INSTRUCTION MANUAL 16 INCH DIGITAL WALL FAN WITH REMOTE ITEM NO.: HI-FAN-W16DIGIT-1P/ HI-FAN-W16DIGIT-2P PLEASE READ AND SAVE THIS INSTRUCTION. Attention: Pictures in the IM are for reference only.
- Page 2 READ AND FOLLOW ALL INSTRUCTION BEFORE OPERATING FAN CAUTION Read rules for safe operation and instructions carefully. WARNING This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse the plug.
- Page 3 ASSEMBLY COMPONENTS 1. Unscrew the secure ring clockwise from the fan motor. Fix the rear grill to the motor then tighten the secure ring again (see fig.1); 2. Insert the blades into the motor shaft pin, and turn the fan blade securing cap counterclockwise to tighten the blade (see fig.2).
- Page 4 TIMER Press the Timer button repeatedly to change the timer setting. The time increases by every 0.5h and maximum timer setting is 7.5h. ON/SPEED Press the ON button on the remote. The fan will start to operate at a low speed if it is the first time you have plugged it in.
- Page 5 All warranties, expressed or implied, are limited for one year from the date of purchase. Tornado is a registered trademark of Hexago LLC. Some states do not allow for the limitation or exclusion of incidental or consequential damages, or do not allow limitation on implied warranties.
Need help?
Do you have a question about the HI-FAN-W16DIGIT-1P and is the answer not in the manual?
Questions and answers