Table of Contents
Advertisement
Parameter
More Setting button
Link Status
Signal Strength
Link Quality
TX Frame
RX Frame
3.2
General Connection Setting
In the "More Setting..." screen, users are allowed to designate the wireless network which
the adapter intends to connect to, enable/disable the WEP data encryption, save or load the
setting values into/from a file, etc.
Description
Press this button for more settings including disable/enable WEP
and Power Saving Mode. Please refer to Section 3.2, 3.3 and 3.4.
Display the status of the wireless connection.
This bar shows the signal strength level. The higher percentage
shown in the bar, the more radio signal been received by the
adapter. This indicator helps to find the proper position of the
wireless device for quality network operation.
This bar indicates the quality of the link. The higher the
percentage, the better the quality.
It shows the number of data frames which are transmitted by the
adapter successfully.
It shows the number of data frames which are received by the
adapter successfully.
7
Advertisement
Table of Contents
