Table of Contents
Advertisement
After the test alerts, return the leak sensor to its location.
After the test alerts, return the leak sensor to its location.
Factory Reset
After factory resetting, all settings will be cleared.
After factory resetting, all settings will be cleared.
Carefully open the bottom case of Leak Sensor .
Carefully open the bottom case of Leak Sensor .
Press and hold the Set Button for about 20 seconds till the statusLED is green and red blinking
and hold the Set Button for about 20 seconds till the statusLED is green and red blinking
and hold the Set Button for about 20 seconds till the statusLED is green and red blinking
alternately.
©
2017 KingTing Tech. Corporation
Door Sensor and Leak Sensor
Leak Sensor
Advertisement
Table of Contents
