Factory Reset; Water Leak Sensor - YoSmart DS77-U02W User Manual

Factory Reset

After factory resetting, all settings will be cleared. resetting, all settings will be cleared.
Carefully open the bottom case of door sensor. Carefully open the bottom case of door sensor.
Press and hold the Set Button for about 20 seconds till there the status LED is green and red Press and hold the Set Button for about 20 seconds till there the status LED is green and red Press and hold the Set Button for about 20 seconds till there the status LED is green and red
blinking alternately.
Sensor Placement
Located the Leak Sensor in a location that may experiencea water leak. the Leak Sensor in a location that may experiencea water leak.

Water Leak Sensor

Water Leak Sensor
©
2017 KingTing Tech. Corporation
Door Sensor and Leak Sensor Leak Sensor