Table of Contents
Advertisement
Cord Type
SJT
SVT
Important Safety Instructions
Read these instructions carefully. Save these instructions for future reference.
1.
Follow all warnings and instructions marked on the product.
2.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clears. Use a
damp cloth for cleaning.
3.
Do not use this product near water.
4.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage
to the product.
5.
Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable
operation of the product and to protect it from overheating, these openings must not be blocked or covered.
Placing the product should never be placed near or over a radiator or heat register, or in a built-in installation
unless proper ventilation is provided.
6.
This product should be operated from the type of power indicated on the marking label. If you are not sure
of the type of power available, consult your dealer or local power company.
7.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
8.
If an extension cord is used with this product, make sure that the total ampere rating of the equipment
plugged into extension cord does not exceed the extension cord ampere rating. Also, make sure that the
total rating of all products plugged into the wall outlet does not exceed the fuse rating.
9.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could resulting a fire or electronic shocks. Never spill liquid of any kind on the
product.
10.
To avoid electronic shock, do not open the cover. There are no user-serviceable parts inside.
11.
Use minimum No 26AWG Wire for telephone cable.
12.
Unplug this product from the wall outlet and refer servicing to qualified service personal under the following
conditions:
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the product.
c.
If the product has been exposed to rain or water.
d.
If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
e.
If the product has been dropped or cabinet has been damaged.
f.
If the product exhibits a distinct change in performance, indicating a need for service.
Table A
Size of Conductors In Cord
Maximum Current Rating of Unit
18AWG
16AWG
14AWG
18AWG
17AWG
4
10Amps
12Amps
12Amps
10Amps
12Amps
Advertisement
Table of Contents
