6.
Monitor/VGA Connector (blue):
Please connect this port with your monitor.
7.
PS/2 Keyboard Connector (purple):
Please plug in your PS/2 keyboard into this connector.
8.
PS/2 Mouse connector (green):
Please plug in your PS/2 mouse cable here.
9.
Power Adapter jack:
This jack is connected to the AC Adapter (provided).
Connecting Your Peripheral Devices
Connecting a Monitor
Connect the monitor cable to the VGA connector on the rear panel of the ViewBox 100.
If the connector has retaining screw, be sure to tighten them, as shown in Figure 1-3.
Figure 1-3. Connecting a monitor via VGA Connector
Connecting a USB Keyboard
Plug the USB Keyboard cable connector into the USB port on the front panel of your
ViewBox System, as shown in Figure 1-4.
Chapter 2 Getting Started
12