Listen Listening System PLS-900 Quick Start Manual

Quick Start Guide
PLS-900 ListenWiFi Personal Listening System
Let's Get This Audio Started

1. PLACE

The PL-900 Server should be plugged directly into
the PL-400 Audio Interface. Do not use USB hubs or
extenders. If the audio source is more than 6 ft. (1.8
m.) from the server, it's recommended to run
shielded audio cable or use audio balun extenders.
The Wireless Access Point (WAP) should be placed
center to the listening area high enough that the
majority of mobile devices will have a clear line-of-
sight. If the ceiling is more than 15 ft. (4.5 m.) high,
the WAP should be lowered. Keep the WAP as far
away as possible from other WAPs and electrical
equipment.
Note: The top side of the WAP (opposite of the
mounting holes) should face the coverage area.

2. CONNECT

Follow the diagram for the directions on connecting
the components.
PL-400
(FRONT)
PL-400
(BACK)
USB 2.0
HIGH SPEED
PL-900
(BACK)
POWER SUPPLY
CAT 5/6
TO INTERNET ROUTER
RCA UNBALANCED
AUDIO SOURCES
PL-200 POWER SUPPLY
(FRONT)
CAT 5
(BACK)
CAT 6
WAP