2.4 Transmit (Manually)
To start transmitting manually, press and hold both the ARMING and CONFIRM
buttons for 3 seconds. The acknowledgement is a single beep. The LED flashes
during the period of transmission.
To stop transmitting the Disable Transmittlng sequence must be performed.
2.5 Disable Transmitting
To stop transmitting manually, press and hold both the ARMING and CONFIRM
buttons for 6 seconds.
The acknowledgement is a single beep and LED flash.
2.6 Test Function
To test the transmitter function of the beacon, press and hold the CONFIRM button.
After 3 seconds there is a single beep and a single LED flash to confirm the test
mode, followed by transmission at low power. The internal sounder buzzes to
indicate that the unit is transmitting. Once the CONFIRM button is released, the
transmission ceases.
9