Setting Sequence - mcmurdo Guardian MOB Beacon Watch User Manual

3.3 Setting Sequence

3.3.1 Normal Time Setting
Press Mode 3 times to enter normal time setting mode. TU flag will flash.
Seconds will start flashing, press Start to set seconds to zero.
Press Reset once: Minutes flashing, press Start to advance.
Press Reset once: Hour flashing, press Start to advance (A is AM, P is PM and H is
24 hour format).
Press Reset once: Date flashing, press Start to advance.
Press Reset once: Month flashing, press Start to advance.
Press Start once: Day of Week flashing, press Start to advance.
Press Mode once: Setting completed, return to normal time readout.
3.3.2 Alarm Time Setting
Press Mode twice. MO flag will flash.
Alarm TIme Hour flashing, press Start to advance.
Press Reset once, Alarm Time Min flashing, press Start to advance.
Press Mode once, setting Is completed, return to normal time readout.
Arm the Alarm by pressing Start & Reset simultaneously; ALM flag will appear.
Disarm the Alarm by pressing Start & Reset simultaneously; ALM flag will
disappear.
11